MIL-PRF-23798D(SH)
DOD-P-15328
-
Primer (Wash), Pretreatment (Formula No. 117 for Metals) (Metric)
MIL-PRF-16552
-
Filters, Air Environmental Control System, Cleanable, Impingement (High
Velocity Type)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-167-1
-
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental
and Type II - Internally Excited)
MIL-STD-889
-
Dissimilar Metals
MIL-STD-1399-300
-
Interface Standard for Shipboard Systems, Electric Power, Alternating
Current (Metric)
MIL-STD-2142
-
Magnetic Silencing Characteristics, Measurement of (Metric)
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVSEA TECHNICAL PUBLICATION
S9074-AR-GIB-010/278
-
Requirements for Fabrication, Welding and Inspection, and Casting
Inspection and Repair for Machinery, Piping and Pressure Vessels
(Copies of this document are available from the Naval Inventory Control Point, 700 Robbins Avenue, Attn:
Code 0862 (Cash Sale), Philadelphia, PA 19111, or www.nll.navsup.navy.mil.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AIR MOVEMENT AND CONTROL ASSOCIATION, INC. (AMCA)
AMCA 300
-
Reverberant Room Method for Sound Testing of Fans (DoD adopted)
(Copies of this document are available from the Air Movement and Control Association, Inc., 30 West
University Drive, Arlington Heights, IL 60004 or online at www.amca.org.)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)/AMERICAN BEARING MANUFACTURERS
ASSOCIATION (ABMA)
ANSI/ABMA STD-4
-
Tolerance Definitions and Gaging Practices for Ball and Roller
Bearings
ANSI/ABMA STD-9
-
Load Ratings and Fatigue Life for Ball Bearings
ANSI/ABMA STD-13
-
Rolling Bearing Vibration and Noise (Methods of Measuring)
ANSI/ABMA STD-15
-
Ball Bearings with Spherical Outside Surfaces and Extended Inner
Ring Width (Includes Eccentric Locking Collars)
ANSI/ABMA/ISO 3290
-
Rolling Bearings - Balls - Dimensions and Tolerances (DoD adopted)
(Copies of these documents are available from the American Bearing Manufacturers Association, Inc., 1101
Connecticut Ave., NW, Suite 700, Washington, DC 20036 or online at www.abma-dc.org.)
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business